If you have dependency problems during installation, you can install them with the following command:
root@ubuntu:/usr/local/src# sudo apt-get install -f
root@ubuntu:/usr/local/src# sudo dpkg -i machbase-fog-x.x.x.community-LINUX-X86-64-release.deb
When the installation is complete, the / opt / machbase folder is created and the default port is set to 5656. After that, the database is created and the Machbase server and the MWA Web server are automatically executed.
In the Machbase directory, there is a directory named 'current' which is a symbolic link to the latest version. In the versions directory, files are located according to the Machbase version.
To delete Machbase, use the following command.
If you install the Machbase server using deb, the /etc/init.d/machbased script file is installed and you can manage it conveniently.
The basic functions to be supported are as follows.
Start the Machbase server. It is the same as machadmin -u.
Shut Down Server
Shut down the Machbase server normally. It is the same as machadmin -s.
Force the Machbase server to abort. It is the same as machadmin -k.
Shut down normally and re-start the Machbase server.
Create a Machbase database. It is the same as machadmin -c.
Delete the Machbase database. It is the same as machadmin -d.
Check Server Status
Check the status of the Machbase server operation. It is the same as machadmin -e.
These are the commands related to the MWA (Machbase Web Analytics) web server.
Change Server Port
Change the port of the Machbase server. If you execute the command and enter the port to be changed, it changes to that port. After the port change, you must restart the Machbase server to apply
These are the commands to manage Machcollector.